PowerSmoke 740 smoke pump
PowerSmoke 740 smoke pump
Item No. A90050
EAN: 4047991900502
$219.00
In stock
PowerSmoke 740 smoke pump
High-quality gear pump with metal gears. Power is supplied via an external battery (up to 2S LiPo) or the receiver battery.
The PowerSmoke 740 smoke pump is the successor to the PowerSmoke 600 with revised electronics and enhanced software features.
The smoke pump can be equipped with an electromagnetic valve on the pressure side (it is controlled directly via the pump electronics) or with a specially developed manual (inexpensive) valve. This enables the smoke to be switched on and off “precisely” and so-called “after-smoke” is avoided. Both valves are available as accessories.
Delivery incl. retaining clamps, screws, receiver connection cable, programming jumper and operating instructions.
Important
Due to the overpressure in the muffler oil and soot are pressed into the pump when the pump is not been used for longer time and is connected to the exhaust system.
In order to ensure the function of the pump, it should be used at least at every 15th flight , a valve (electromagnetic valve or check-valve) or the connection to the muffler must be interrupted.
There is no guarantee or warranty if the pump is stuck and dirty due to improper use!
[woo_product_slider id=”17531″]
