- Brushless Motors
- Hacker Outrunner
- Hacker Inrunner
- F3A Brushless Motors
- Typical Glider Drives
- Helicopter Motors
- Carline Motors
- Speed Controllers (ESCs)
- Propellers & Accessories
- BEC and RC Electronic
- Servos
- Wing & Fuselage Connectors
- Plugs, Sockets & Cables
- Para-RC
- Ducted Fan Systems
- RC Airplanes
- Smoke and fuel pumps, tanks
- Accessories
- Hacker Merchandise
- Snow Buggy
- New in our shop
- %% HOT DEALS! %%
Stream-Fan 100mm kv1300 ducted fan system
Stream-Fan 100mm kv1300 ducted fan system
Product description and features
Powerful ducted fan drive suitable e. g. for sport and scale R/C models with 8S LiPo battery up to approx. 6 kilograms take-off weight.
Driven by our Hacker Motor E50-M 1.5Y kv1300 inrunner motor, the GRP-reinforced 11-blade rotor achieves a high degree of efficiency and generates a pleasant turbine sound.
Complete system ready for installation
The electric motor and WeMoTec ducted fan are delivered ready for installation. The complete ducted fan system is precisely balanced, tuned and tested before delivery.
Measurement conditions
The Stream-Fan ducted fan system was measured with a stabilized voltage of 3.70 volts per cell. The information on current and thrust (see Product data tab) are based on the measurement with a small inlet lip (radius 6 millimeters) at an outside temperature of 21 degrees Celsius, 50 meters above sea level and standard air pressure. These values may vary depending on the battery, speed controller and installation situation.
Accessories
Suitable speed controllers and safety switches can be found in the “Accessories” tab.
Delivery contents
1 Stream-Fan 100mm kv1300 ducted fan system (consisting of a Hacker Motor E50-M 1.5Y kv1300 inrunner and WeMoTec ducted fan) and 1 manual.
*Note: If an ducted fan is not installed in a suitable flow channel, it needs an inlet lip to operate properly. This Stream-Fan ducted fan system does not include an inlet lip.
Specifications | |
Voltage [V] | 29.6 |
Load current at 8S [A] | 101 |
Power at 8S [W] | 2990 |
Idle speed per volt (kv) | 1300 |
Thrust at 8S [kg] | 4.6 |
Beam speed at 8S [m/s] | 75.7 |
Dimensions and weight | |
Weight [g] / [oz] | 460 / 16.22 |
Additional parts for this item:
New in our shop
See all items that have recently been added to our shop
» To new products «
More info


Motor Service
Whether you require specific information about a certain product, or have a motor that needs inspection or repair, visit our motor service page.

Hacker Motor Wiki
In the Hacker Motor Wiki you will find operating instructions, technical data, and other important information about our products.