Q80-5L V2 kv215
Q80-5L V2 kv215
Item No. 37418018
EAN: 4250320249634
$702.91
Description
Product Data
Accessories
Description
Q80-5L V2
The Q80-L V2 is the lightweight large model drive in the Hacker engine segment.
Ideal for 3D / aerobatic models with ~2.5 -2.6m (98 – 102 in.) wingspan and up to ~12kg (26 lb) (aerobatic 15kg / 33lb) weight. The motor also cuts a fine figure in scale models up to ~20kg (44 lbs) or fast WW2 models up to 18kg (40 lbs.)
The new prop driver with a 30mm bolt circle and 4 x M5 screws transfers the high torque of the Q80 perfectly to the prop.
Specifications
| Power range | max. 7000W (15 sec.) | |
| Idle Current @ 8.4V | 2.40A | |
| Resistance (Ri) | 0.007 Ohm | |
| RPM/Volt (kv) | 215 RPM | |
| Weight | 1335g / 2.94 lb. | |
| Outer diameter | 88.5 mm / 3.48 in. | |
| Length (back mount) | 89.3 mm / 3.51 in. | |
| Pole | 28 | |
| Recommended ESC | MasterSpin 170 OPTO | |
| Recommended timing | 25° – 30° | |
| Shaft | 10 mm / 0.39 in. | |
Product Data
| Specifications | |
| max. power range [W] (max.15 sec.) | 7000 |
| Poles | 28 |
| Turns | 5 |
| Idle current (I0) at 8.4V [A] | 2.4 |
| Internal resistance (Ri) [Ohm] | 0.007 |
| Recommended timing [°] | 25 |
| Switching Frequency [kHz] | 8 |
| Controller recommendation [A] (depending on setup) | 170 – 300 |
| Idle speed per volt (kv) | 215 |
| Dimensions and weight | |
| Weight [g] | 1335 |
| Length [mm]/[in] | 89.3 |
| Outer diameter [mm]/[in] | 88.5 |
| Delivery contents | |
| Prop Adapter | yes |
| Mounting cross | yes |
| Gold plug mm (recommended) | 5.5 – 8 |
| Backmount mountable | yes |
| Front mountable | no |
Accessories
New in our shop
See all items that have recently been added to our shop
» To new products «
More info
Motor Service
Whether you require specific information about a certain product, or have a motor that needs inspection or repair, visit our motor service page.
Hacker Motor Wiki
In the Hacker Motor Wiki you will find operating instructions, technical data, and other important information about our products.