- Brushless Motors
- Hacker Outrunner
- Hacker Inrunner
- F3A Brushless Motors
- Typical Glider Drives
- Helicopter Motors
- Carline Motors
- Speed Controllers (ESCs)
- Propellers & Accessories
- Transmitter – Receiver – Central Box – Accessories
- BEC and RC Electronic
- Servos
- Batteries and accessories
- Wing & Fuselage Connectors
- Plugs, Sockets & Cables
- Para-RC
- Ducted Fan Systems
- RC Airplanes
- Smoke and fuel pumps, tanks
- Accessories
- Hacker Merchandise
- Snow Buggy
- New in our shop
- %% HOT DEALS! %%
Q80-14XS kv209 F3A
Q80-14XS Kv209 F3A
We proudly present the light Q80-14XS F3A competition engine for models up to approx. 5kg. The Q80 outrunner has an innovative motor design. Due to the changed end shield and the shortened overall length, the weight was reduced by more than 100g compared to the previous Q80-S. be lowered.
The new geometry combined with the short design offers maximum cooling. The Q80 is positioned by the classic attachment to the engine clamp (front mount) in such a way that the air flow from the propeller can optimally flow through the entire engine during operation.
The motor has excellent efficiency, offers maximum power and the best performance. Every Q80 engine is wound, assembled and extensively tested by hand in our house.
Quality “Made in Germany” for the highest demands.
As a controller, we recommend the Master Spin 99 Pro, which has been tried and tested thousands of times in F3A use.
Specifications
Power range | max. 2800W (15 sec.) |
---|---|
Idle Current @ 8.4V | 0.9A |
Resistance (Ri) | 0.025 Ohm |
RPM/Volt (kv) | 209 U/min-1 |
Weight | 528g / 1.16 lb. |
Outer diameter | 88.5mm / 3.48 in. |
Length | 69 mm / 2.72 in. |
Number of poles | 28 |
Recommended ESC | MasterSpin 99 Opto |
Recommended timing | 25° |
Switching frequency | 8kHz |

Specifications | |
max. power range [W] (max.15 sec.) | 2800 |
Poles | 28 |
Turns | 14 |
Idle current (I0) at 8.4V [A] | 0.9 |
Internal resistance (Ri) [Ohm] | 0.025 |
Recommended timing [°] | 25 |
Switching Frequency [kHz] | 8 |
Controller recommendation [A] (depending on setup) | 85 – 100 |
Idle speed per volt (kv) | 209 |
Dimensions and weight | |
Weight [g] | 528 |
Length [mm] | 69 |
Outer diameter [mm] | 88.5 |
Shaft diameter [mm] | 8 |
Delivery contents | |
Prop Adapter | yes |
Mounting cross | no |
Gold plug mm (soldered) | 4 |
Backmount mountable | no |
Front mountable | yes |
New in our shop
See all items that have recently been added to our shop
» To new products «
More info


Motor Service
Whether you require specific information about a certain product, or have a motor that needs inspection or repair, visit our motor service page.

Hacker Motor Wiki
In the Hacker Motor Wiki you will find operating instructions, technical data, and other important information about our products.