Q80-11 PSD kv225 Senstrol

Item No. 38798519

EAN: 4250320242161

$542.40

Description

Accessories

Description

Q80-11 PSD Senstrol electric motor

Product description and features

The hacker R & D team around the developer Martin Vilsmeier has once again achieved a big hit with this new Q80-11 PSD Senstrol!

An uncompromising revision has made it possible to further improve the weight-performance ratio. The overall length has been shrunk to the size of the Q80-XS.

The most important reason why the power available with this motor is significantly higher than with the normal Q80 is due to the unique Senstrol technology. Not only are the motor and controller 100% matched to each other, but the motor is controlled with a real sine wave. With this control, the motor can be operated with more power and at the same time has a higher efficiency, with less power loss and heat development.

The measured values speak for themselves, the new Q80-11 PSD Senstrol has up to 25% more power than its brother the normal Q80-11!

Like every Q80, this Q80-11 PSD Senstrol is built, tested and measured by hand in-house.

“PSD” > “P”erformance, size “S” and “D” delta connection.

Quality “Made in Germany” for the highest demands.

Specifications

Power range	max. 3400W (15 sec.)
Idle Current @ 8.4V	1.1A
Resistance (Ri)	0.02 Ohm
RPM/Volt (kv)	205 U/min-1
Weight	620g / 1.34 lb.
Outer diameter	88.5mm / 3.48 in.
Length	65.5mm / 2.58 in.
Number of poles	28
Controller recommendation	Master Senstrol 120A Opto

Typical setups

Prop	Xoar CFK 21×13	Mejzlik 20x14EL 3Bl.	Falcon 20×13,5 3Bl.
V / LiPo	37V = 10S LiPo	37V = 10S LiPo	37V = 10S LiPo
Amp.	92A	91A	90A
Power	3400W	3367W	3330W
RPM	6480	6000	6270
Controller	Master Senstrol 120A Opto	Master Senstrol 120A Opto	Master Senstrol 120A Opto