The Master Spin Pro series offers extended programming options, such as “AUTO-Timing” and the direct input of the cut-off voltage to meet all requirements and battery types.

In addition, the transmission of basic telemetry functions via the Jeti Duplex System is possible (motor speed, drive battery voltage, controller temperature, fault diagnosis).

Note:
– no Duplex EX telemetry, i.e. Display of these values ​​”only” in the JetiBox mode of the DC / DS-16 and the JetiBox Profi
– Our controllers with optocouplers can also be used on receiving systems with 2S Lipo supply.

Operating voltage / number of cells: 6-18NC / 2-6 LiPo / 6-26V
Dimensions (without cable): 70 x 25 x 12 mm / 2.76 x 0.98 x 0.47 in. 
Internal resistance (mOhm): 2 x 1.0
Switching BEC: No, optocoupler
Helicopter mode can be activated: YES
Weight: 50 g  / 1.76 oz.
Current duration (2.2Ah batt.): 70 *
FETs: 48
Programmable: Yes (Jeti Box + mode programming via throttle stick)
Max. field revolutions: 210,000

* with good cooling and ambient temperature below 68°F (20 °C)

SPIN Pro Manual