Lighting set for Glider ACL 3S Aurora LCU ONE
Lighting set for Glider ACL 3S Aurora LCU ONE
Item No. OPT4191
EAN: 4250320276340
$120.31
Lighting set for Glider ACL 3S Aurora LCU ONE
Lighting set specially designed for gliders. 2x glider ACL V2 3S, each consisting of nine 5-watt LEDs. For good visibility even at high altitudes in sunny weather.
Operation only with 3S LiPo or 3S LiIon battery without resistance. Only flash operation possible.
The power consumption is approx. 1 ampere. For a flight time of 30 minutes, you should use at least a 3s battery with 1.000mAh.
Brightness: 1536 lumens
Beam angle: 125°
Max. current: 4500mA
Voltage: 3.45V
Delivery contents
2x Glider ACL V2 3S modules, 1x Optotronix Aurora LCU ONE
Hint
Please programm the Optotronix Aurora LCU ONE you wish to use before connecting the glider ACL. If the glider ACL is inadvertently connected to a channel of the lighting electronics that is permanently lit due to its default setting, the glider ACL may be damaged or destroyed after a short period of operation.The following values must be set on the transmitter
The switching thresholds are evenly distributed over the range 1000 to 2000us.
1100us -> light off approx. -80 %
1260us -> double flash (. . ) approx. -48%
1420us -> triple flash (… ) approx. -16%
1580us -> triple flash with afterflash (… – ) +16%
1740us -> strobe with pause (….. ) approx. +48%1900us -> light permanently on approx. +80% Not suitable for glider ACL V2
Attention
The LEDs are extremely bright, do not look directly into the light from a close distance! Damage to the retina can occur.
| Specifications | |
| Color | White |
| Beam angle LED | 125° |
| Brightness | 1536 lumen |
| Voltage | 10.35V…13.0V (3S LiPo or 3S LiIon battery) |
| Technical Data – Lighting Electronic | |
| Input voltage | 10.35V…13.0V (3S-LiPo oder 3s LiIon-Akku) |
| Flash sequences | Light off, double flash, triple flash, triple flash with after flash, strobe with pause, no continuous light operation |
Manual – AURORA LCU ONE
