JETImodel SBEC
Item No. 22985471
This SBEC switching regulator from JetiModel makes it possible to supply your receiver and servos with the necessary voltage and current directly via the flight battery.
$50.94
In stock
With this SBEC switching regulator from JetiModel, it is possible to supply your receiver and servos with the necessary voltage and current directly via the flight battery.
With no less than 12A impulse current, the SBEC works with 2-10S LiXX batteries and can optionally output a voltage of 5-8V.
We at Hacker use it, for example, in our factory helicopters to replace the bulky and heavy receiver battery. Also ideal when operated on 2S Lipo / LiFe as a powerful supply for the RC system of models with combustion engines or for more than 10S.
On the receiver side, the SBEC is equipped with two UNI (JR) connection cables. These reduce the transition resistance and are plugged into two free slots on the receiver.
Recommended input voltage [V] | 6 – 42 |
|---|---|
Supply Voltage max. [V] | 50 |
Supply Voltage min. [V] | 6 |
Voltage BEC [V] | 5.0 / 5.5 / 6.0 / 7.0 / 8.0 V |
Pulsed current [A] | 12 |
Sustained current [A] | max 6.2 |
Weight [g] / [oz] | 29 / 1 |
Dimensions [mm] / [in] | 60 x 28 x 10 / 2.36 x 1.10 x 0.39 |
Motor Service
Whether you require specific information about a certain product, or have a motor that needs inspection or repair, visit our motor service page.
Hacker Motor Wiki
In the Hacker Motor Wiki you will find operating instructions, technical data, and other important information about our products.