EMC PCB, 5 pieces

Adapter board that allows direct soldering of the EMC connectors (MPX compatible with double contacts.)  The individual cables (e. g. servo cables) can then simply be soldered onto the large soldering pads.

A suitable shrink tube (Item no. A84025) is sufficient for insulation. Especially suitable for producing the servo supply for surface connectors.

In conjunction with the EMC housings contained in the EMC connector set, there is even no need to glue the housing to the housing, since the circuit board fixes the high-current connector firmly in the housing by soldering.  The two middle pins (usually plus and minus) are brought together on the circuit board in the 4-pin version.  The middle pins of the 6-pin variant are not merged. 

The leads to a total of 4 (4-pin variant) or 6 (6-pin variant) electrically isolated connects on the 8 solder pads.  This allows servo cables to be soldered to the top and bottom of the circuit board without any problems.  This board is 1.2mm thick to fit the EMC connectors (also suitable for the original MPX.)

This item is available in different variants. Please select the desired variant.