Compact LiPo regulator with magnet switch transmitter and selectable output voltage. Suitable for 5/6cell NiCad/NiMH as well as LiIon/LiPo and LiFePo4 batteries. Regulated and stabilized output voltage 5.9 volts or 7.2 volts adjustable.

Electronic On/Off-switch for complete contactless switching operation with an external magnet from outside.

The used battery type and the low voltage detection can be programmed. Intelligent voltage monitoring with optical error indication.

Designed for 5 to 10 servos. Supports 4A continuous current and 25A peak current. For small engine models up to approx. 2m wingspan, glider planes up to approx. 3m wingspan, impeller jets or helicopters.

Connectors

Battery connector cable JR/Uni with flexible silicone strand 0.5 mm²/AWG21 cross section.
Integrated charging cable JR/Uni.
Dual JR/Uni connectors with high grade silicone strand 0.5 mm²/AWG21 cross section on output side.
All connectors are gold plated (FCI contacts).

Delivery contents

1 Magnetic switch DPSI Micro SingleBat, 1 switching magnet with EMCOTEC label, 1 vibration insulator, 2 washers, 2 screws, 1 drilling template and 1 quick reference guide.

Documentation

See a detailed documentation of the DPSI Micro SingleBat in the Hacker Motor Wiki.

Notice: The switching off process of DPSI works with a hall effect sensor. Hall effect sensors can be influenced by magnetic fields. It is possible that the DPSI switches itself off when exposed to a very strong magnetic field (i.g. electric drive). Current-carrying cables generate a magnet field. So please run all cables which are carrying a high current (>100A) with a distance of at least 3cm (1.18in) from the DPSI.

Specifications


Power sources	5 to 7-cell NiCd / NiMH-Akkus, 2-cell LiIon, LiPo, LiFePO4-Akkus
Operating voltage range	4.8V – 12V
Nominal input voltage	6.0V – 8.4V
Output voltage	5.9V or 7.2V adjustable via slide switch
Quiescent current (switched off)	<1µA per battery
Quiescent current (switched on)	ca. 90mA total (LED on)
Max. permanent current @ 5.9V	4A
Max. peak current @ 5.9V	10A
Maximum power dissipation (duration)	8W
Environmental conditions	-10°C to +50°C
Permissible temperature range	-25°C bis +85°C (storage)
CE-Prüfung	according to 2004/108/EC
Max.peak current (20ms)	25A
Drop-Out-losses @ 2A	0.1V
Dimensions	2.89″ x 0.76″ x 0.56″ (73.4mm x 19.4mm x 14.1mm)
Weight	1.16oz (33g)
Application scope
Number of servos	5 powerful servos, up to 10 servos in the lower performance range.
Suitability	Small motor models up to a wingspan of approx. 2 meters, gliders up to a wingspan of approx. 3 meters, impeller jets, helicopters.