- Brushless Motors
- Hacker Outrunner
- Hacker Inrunner
- F3A Brushless Motors
- Typical Glider Drives
- Helicopter Motors
- Carline Motors
- Speed Controllers (ESCs)
- Propellers & Accessories
- Transmitter – Receiver – Central Box – Accessories
- BEC and RC Electronic
- Servos
- Batteries and accessories
- Wing & Fuselage Connectors
- Plugs, Sockets & Cables
- Para-RC
- Ducted Fan Systems
- RC Airplanes
- Smoke and fuel pumps, tanks
- Accessories
- Hacker Merchandise
- Snow Buggy
- New in our shop
- %% HOT DEALS! %%
C54-1Y L Glider 6.7:1 Competition Kv 2745
Internal rotor C54-1Y L Glider 6,7:1 Competition Kv 2745
Product description and features
The Hacker C54 motors are compact 4-pole inrunner motors with 6.7:1 reduction gear and 6 mm shaft. In the competition version, this is the strongest internal rotor drive with a high efficiency at very low weight. The C54 gear drives are available in two lengths, both as a glider and acro variant.
Drive recommendation
This design is recommended for sporty gliders with approx. 13-18 lbs. (6 to 8 kg) take-off weight and 5S – 6S LiPo drive battery, also suitable in Connection to the FesEx-Uni8 system.
Accessories
You can find suitable controllers, batteries and a suitable air screw in the Accessories tab.
Scope of delivery
Inrunner C54-1Y L Glider with 6.7:1 reduction gear, Gfk spacer ring, special gear grease and assembly and operating instructions.
Drive recommendation
Drive suggestion | |
Propeller | 16″-19″ |
Specifications | |
max. power range [W] (max.15 sec.) | 1700-2700 |
Poles | 4 |
Turns | 1 Y |
Idle current (I0) at 37V [A] | 1.3 |
Internal resistance (Ri) [Ohm] | 0.011 |
Gear reducing | 6.7:1 |
Output shaft | 6mm |
Recommended timing [°] | 5-10 |
Switching frequency [Hz] | 8 |
Controller recommendation [A] (depending on setup) | 100-140 |
No load speed per volt (kv) without gearbox | 2745 |
Dimensions and weight | |
Weight [g] / [oz] | 445 / 15.7 oz. |
Length [mm]/[in] | 99.85 / 3.93 |
Diameter [mm]/[in] | 46 / 1.81 |
Shaft diameter [mm]/[in] | 6 / 0.24 |
Delivery contents | |
Prop adapter | no |
Mounting cross | no |
Gold plug mm (soldered) | 4mm |
Back mountable | no |
Front mountable | yes |
Additional parts for this item:
New in our shop
See all items that have recently been added to our shop
» To new products «
More info


Motor Service
Whether you require specific information about a certain product, or have a motor that needs inspection or repair, visit our motor service page.

Hacker Motor Wiki
In the Hacker Motor Wiki you will find operating instructions, technical data, and other important information about our products.