The new Turnado V3 Glider version fits seamlessly into our program for glider nose drives/FES. Due to the shaft extension with the built-in support bearing, this drive can also be installed in slim glider noses.

• Shaft can easily be moved by loosening the three M3 screws on the back. The model can be converted back to a pure glider within a very short time. E-flight and glider towing possible in alternation.
• is based on the 1000 times proven Hacker A50-Turnado
• free shaft with 6mm diameter, for the use of the usual prop drivers and scale spinners

Application:

For glider nose drive / FES:  perfect as a nose drive for starting on your own landing gear with a small propeller.

• for gliders up to ~11kg: 6S Lipo, RFM 12.5×10, Master Mezon 120 lite (power consumption ~65-70A in flight)
• for gliders up to ~12kg: 6S LiPo, RFM 13×10, Master Mezon 120 lite (power consumption ~80-85A in flight)
• for gliders up to ~8kg: 4S LiPo, RFM 16×10, Master Mezon 120 lite (power consumption ~80A in flight)

Specifications:
(see image above for overall dimensions)

No-load current at 8.4V: 1.9A
Internal resistance: 0.015 ohms
Idle speed per volt: 530 rpm
Weight: 445g / 15.7 oz.
Outer diameter: 51.5 mm / 2.03 in.
Length: 61mm / 2.40 in.
Number of poles: 10
ESC recommendation: 80A-130A brushless
Recommended timing: 15°-20°
Shaft diameter: 6mm (internal 8mm) / 0.24 in. (internal 0.31 in.)
Fastening thread: M4, 25 / 30mm

Note:

The A50 Turnado engine does not come with a prop adapter. Since this drive is used for glider models with a folding propeller, a wide variety of folding propeller center parts are used to match the model. You will find these in many variations under the “accessories” tab.