- Brushless Motors
- Hacker Outrunner
- Hacker Inrunner
- F3A Brushless Motors
- Typical Glider Drives
- Helicopter Motors
- Carline Motors
- Speed Controllers (ESCs)
- Propellers & Accessories
- Transmitter – Receiver – Central Box – Accessories
- BEC and RC Electronic
- Servos
- Batteries and accessories
- Wing & Fuselage Connectors
- Plugs, Sockets & Cables
- Para-RC
- Ducted Fan Systems
- RC Airplanes
- Smoke and fuel pumps, tanks
- Accessories
- Hacker Merchandise
- Snow Buggy
- New in our shop
- %% HOT DEALS! %%
A30-22 S V4 kv1440
A30-22 S V4 kv1440
Product description and features
This small and lightweight outrunner is offered in four lengths (S, M, L, XL). The A30 motors, are perfect for operation on 3S or 4S LiPo batteries. The A30-V4 series comes with an optimized integrated fan and high quality ball bearings. This increases efficiency, stability and increases the range of use. The perfect drive in motor models, electric gliders, paragliders and 3D models.
This weight-optimized high-end motor with a weight of only 70g fits perfectly in motor models up to 1.0 kg.
Accessories
You can find the suitable controller, batteries as well as a suitable propeller in the accessories tab.
Scope of delivery
1x A30-22 S V4 kv1440, accessories for front and rear mounting, prop driver and manual.
Drive recommendation | ||||||
---|---|---|---|---|---|---|
Propeller | APC 7×4 | APC 8×6 | ||||
LiPo | 3S | 3S | ||||
Voltage [V] | 11 | 11 | ||||
Current [A] | 20 | 29 | ||||
Power [W] | 221 | 319 | ||||
RPM | 14525 | 13469 | ||||
Controller [A] | 30 | 40 | ||||
Timing [°] | 20-25 | 20-25 |
Specifications | |
max. power range [W] (max.15 sec.) | 250 |
Poles | 14 |
Idle current (I0) at 8.4V [A] | 1.4 |
Internal resistance (Ri) [Ohm] | 0.041 |
Recommended timing [°] | 20 – 25 |
Recommended timing [kHz] | 8 |
Controller recommendation [A] (depending on setup) | 30 – 40 |
Idle speed per volt (kv) | 1440 |
Dimensions and weight | |
Weight [g] / [oz.] | 70 / 2.5 |
Length [mm]/[in] | 28 / 1.1 |
Outer diameter [mm]/[in] | 37.2 / 1.46 |
Shaft diameter [mm]/[in] | 5 / 0.2 |
Delivery contents | |
Prop adapter | yes |
Mounting cross | yes |
Gold plug mm (soldered) | 3.5 |
Back mount | yes |
Front mount | yes |
New in our shop
See all items that have recently been added to our shop
» To new products «
More info


Motor Service
Whether you require specific information about a certain product, or have a motor that needs inspection or repair, visit our motor service page.

Hacker Motor Wiki
In the Hacker Motor Wiki you will find operating instructions, technical data, and other important information about our products.