- Brushless Motors
- Hacker Outrunner
- Hacker Inrunner
- F3A Brushless Motors
- Typical Glider Drives
- Speed Controllers (ESCs)
- Propellers & Accessories
- BEC and RC Electronic
- Servos
- Wing & Fuselage Connectors
- Plugs, Sockets & Cables
- Para-RC
- Model Airplanes
- Smoke and fuel pumps, tanks
- Accessories
- T-Shirts & Caps
- Snow Buggy
- New in our shop
A20-6 XL 10-Pole EVO kv2500 + 4.4:1
A20-6 XL 10-Pole EVO kv2500 + 4.4:1
The perfect drive for light F3J models! Setup: on 3S lipo with Ae 16×8 at ~ 38A
Note:
– There is no prop adapter with the motor / gearbox. Since this drive is mainly used for glider models with folding propellers, a wide variety of folding propeller middle parts are used for this model.
You can find these in different versions under the “Accessories” tab.
– the maximum screw-in depth of the fastening screws is 4.5mm
Power range | max. 300W (15 sec.) | |
Idle Current @ 8.4V | 3.4A | |
Resistance (Ri) | 0.020 Ohm | |
RPM/Volt (kv) | 2500 RPM | |
Weight | 4.58 oz. (130g) | |
Diameter | 1.10 in. (28 mm) | |
Length | 2.56 in. (65 mm) | |
Recommended speed controller | 55A Brushless | |
Recommended timing | 15° – 20° | |
Gear Ratio | 4.4:1 |
New in our shop
$162.58
$162.58
$181.61
$181.61
$176.46
$213.60
$213.60
$26.11
See all items that have recently been added to our shop
» To new products «
More info


Motor Service
Whether you require specific information about a certain product, or have a motor that needs inspection or repair, visit our motor service page.

Hacker Motor Wiki
In the Hacker Motor Wiki you will find operating instructions, technical data, and other important information about our products.