A10-15S kv2320
A10-15S kv2320
Product description and features
The A10 motors are compact outrunner motors from our A-series and offer high efficiency at low weight. The A10 motors are available as direct drive and as gear drive for small motor and glider models. This small weight-optimized high-end direct drive is often used in motor and 3D models around 200g take-off weight.
The gearbox version is used in the HLG and RES class and is perfect for all small and light glider models up to approx. 700g take-off weight.
Accessories
You will find the appropriate controller, batteries and a suitable propeller in the accessories tab.
Delivery contents
1x A10-15S kv2320, aluminium prop adapter, GRP bulkhead, adapter for GWS and APC propellers, O-rings and mounting screws.
Drive Recommendations

| Specifications | |
| max. power range [W] (max.15 sec.) | 55 |
| Poles | 12 |
| Idle current (I0) at 8.4V [A] | 0.63 |
| Internal resistance (Ri) [Ohm] | 0.289 |
| Recommended timing [°] | 20 – 25 |
| Switching Frequency [kHz] | 8 |
| Controller recommendation [A] (depending on setup) | 5 – 10 |
| Idle speed per volt (kv) | 2320 |
| Dimensions and weight | |
| Weight [g] | 15 |
| Length [mm] | 21 |
| Outer diameter [mm] | 21 |
| Shaft diameter [mm] | 2 |
| Delivery contents | |
| Prop Adapter | Yes |
| Mounting cross | Yes |
| Gold plug mm (soldered) | 2 |
| Back mountable | shaft conversion required |
| Front mountable | Yes |













