DITEX EL0510M
$58.86Micro servo made of full aluminum with 15 lbs. (6.8 kg) pulling load at 7.4 volts and a regulating time of 0.09 seconds for 60 degrees.
-
-
Para-RC Mix
$24.45Description Downloads Description The Para-RC Mix is made especially for RC-paragliders and RC-skydivers. Special mix-program for both arms, so you can fly the paraglider/skydiver like a normal glider – with elevator/aileron. The Para-RC Mix will work like a delta-mix, but it offers a much greater arm movement. The neutral position of the arms will be…
-
-
Para-RC Accelerator-Set
$40.61Description Description Hacker Para-RC accelerator set With a model paraglider, as with the original, there is the option of changing the angle of the para by shortening the A-lines. With the Hacker accelerator kit it is possible to shorten the lines and accelerate the para via your transmitter. Thus, quick climbs can be carried out…
-
-
Para-RC Spare Line Dyneema white (5m)
$7.02- for repairs
- diameter 0.6mm
- is used at the RC-Arcus and RC-Astral for the main lines
-
Para-RC D-Ring Loop set 2pcs
$4.99With this set you can double the steering travel. Perfect for extreme acro maneuvers and applications that require a lot of travel.
-
-
Para-RC Cloud 0.5 arms (set of 2)
$6.08Description Description Practical feed-through holes for the brake line Is screwed onto the servo arm Lever length 57mm Perfect for acro maneuvers Matt black finish Delivery contents 2 arms
-
-
Para-RC D-Rings (10 pcs.)
$11.09– As a spare part or for your own system
– Connection part between the lines and risers of an RC Paragliders -
Para-RC Shackle 3.5mm (Set with 2 pcs.)
$3.28Description Description Para-RC Shackle 3.5mm (0.14 in.) (Set with 2 pcs.) connects harness to the glider canopy thickness of pin: 3.5mm / 0.14 in. external width: 16mm / 0.63 in. internal width: 8mm / 0.31 in. height 26mm / 1.02 i n.
-
-
-
DITEX EL3214S
$98.77Standard servo made of solid aluminum with 70.55 lb. (32 kg) pulling load at 7.4 volts and a regulating time of 0.14 seconds for 60 degrees.
-
-
-
JETImodel DSM ESC
$66.78Description Product Data Downloads Description Electronic circuit for voltage supply of the receiver and the servos in the R/C model. The JETImodel DSM ESC supplies the receiver system either via two BEC speed controllers or with a combination of BEC speed controller and a backup battery. Switching on and off The switch-on and switch-off process…
-
Speed Controller X-5-Pro with BEC
$22.29Description Specifications Description Speed Controller X-5-Pro with BEC Specifications Operating Voltage 2-3 LiPo / 5-10NC Dimensions 25x17x6mm / 0.98×0.67×0.24 in. Weight 5g / 0.18 oz. Operating Current 5A Helimode n0 USB-Interface n0 BEC Linear, 5V BEC-load 2-3 Servos
-
A10-7L kv2200
$41.54Description Specifications Description The A10 motors are the smallest outrunners in our program. They offer excellent efficiency with the lowest weight. These 12-pole external outrunners are ideal for small models up to approx. 200g (7oz). Included with the motor: backmount made of aluminum and fiberglass prop adapter for GWS, STO and APC props with O-rings…
-
A10-15S kv2320
$36.98Description Specifications Description The A10 motors are the smallest outrunners in our program. They offer excellent efficiency with the lowest weight. These 12-pole external outrunners are ideal for small models up to approx. 200g (7oz). Included with the motor: backmount made of aluminum and fiberglass prop adapter for GWS, STO and APC props with O-rings…
-
-
JETImodel SBEC
$50.94This SBEC switching regulator from JetiModel makes it possible to supply your receiver and servos with the necessary voltage and current directly via the flight battery.
-
Para-RC fastening set
$10.08Para-RC fastening set
– for the middle and smaller Para-RC Sets– not for the XXL versions -
Para-RC aluminum servo horn (set with 2 pcs.) for Savöx / Para-RC servos
$12.11– for Savöx / Para RC Servos
– for Servos with 25 Tooth drive
-
-
Shaft for A60-M V4 28-Pole Glider
$19.96Description Description Shaft for A60-M V4 28-Pole Glider Product description and features Shaft for A60-M V4 28-Pole Glider. Compatibility The shaft is also suitable for modifying a A60-M V4 28-Pole FesEx to the Glider version. Delivery contents 1 shaft for A60-M V4 28-Pole Glider
-
Shaft for A50-L-V4 Motor
$14.97Description Description Shaft for A50-L-V4 Motor – internal diameter 0.31 in (8mm,) extern shaft end 0.24 in (6mm)
-
Speed Controller X-70-SB-Pro 2-6S
$98.97Product Data Product Data Operating Voltage 2-6 LiPo / 8-18NC Dimensions 2.95 x 1.10 x 0.51 in. (75x28x13mm) Weight 1.90 oz. (54g) Operating Current 70A Helimode Yes USB-Interface Programmable with USB-Interface BEC switching BEC, 5.5V BEC-load 2-6 Servos
-
Speed controller X-55-SB-Pro
$88.98Speed controller with BEC for brushless motors. The switching BEC is suitable for two to six servos.
-
Shaft for A60-L (159.3 mm)
$20.30Description Description Shaft for A60-L (159.3mm)EAN: 4250320229391
-
-
Shaft for gear 6.7:1 ACRO 8mm
$22.32Output shaft 8mm for the C50-Acro and the C50 / 54-Acro Competition motor with 6.7:1 gearbox as a spare part.
-
JR servo connector (couplings) including crimp contacts
$8.09Description Description Delivery contents: Housing and crimp contacts for 10 JR servo plugs.
-
JR servo sockets including crimp contacts
$6.92Description Description Delivery contents: Housing and crimp contacts for 10 JR servo sockets.
-
-
-
DITEX servo wire extension 20 AWG (0.50mm²), 59 in. (150cm)
$12.13Description Description DITEX servo extension lead 20 AWG (0.5 mm²), 59 in. (150cm) – Wire cross section 20 AWG (0.5mm²) – Length 59 in. (150cm) – Highly flexible, heat-resistant silicone cable – Quality, gold-plated contacts – twisted
-
DITEX servo wire extension 20 AWG (0.50mm²), 39.37 in (100cm)
$8.09Description Description DITEX servo extension lead 20 AWG (0.5 mm²), 39.37 in. (100cm) – Wire cross section 20 AWG (0.5mm²) – Length 39.37 in. (100cm) – Highly flexible, heat-resistant silicone cable – Quality, gold-plated contacts – twisted
-
DITEX servo wire extension 20 AWG (0.50mm²), 31.5 in. (80cm)
$7.38Description Description DITEX servo extension lead 20 AWG (0.50mm²), 31.5 in. (80cm) – Wire cross section 20 AWG (0.50mm²) – Length 31.5 in. (80cm) – Highly flexible, heat-resistant silicone cable – Quality, gold-plated contacts – twisted
End of content
End of content